Rancang Bangun Bearing Heater Berbasis Induksi Electromagnetic
Abstract
Perawatan dan perbaikan bearing pada alat berat merupakan salah satu aspek penting dalam menjaga kinerja dan keandalan mesin. Proses pemasangan bearing yang tidak tepat dapat menyebabkan kerusakan dini, meningkatkan waktu henti operasional, dan menambah biaya perawatan. Salah satu metode yang umum digunakan untuk mempermudah pemasangan bearing adalah dengan pemanasan menggunakan bearing heater. Penelitian tugas akhir ini bertujuan untuk merancang dan membangun alat bearing heater yang efisien, ekonomis, dan sesuai untuk kebutuhan industri alat berat. Metode yang digunakan meliputi studi literatur, perancangan mekanik dan elektrik, serta pengujian performa alat. Desain alat ini mengutamakan kemudahan penggunaan, pengendalian suhu yang presisi, serta keamanan operator. Hasil pengujian menunjukkan bahwa alat bearing heater yang dirancang mampu memanaskan bearing secara merata hingga suhu kerja yang diinginkan dalam waktu yang relatif singkat, sehingga mempercepat proses perbaikan dan mengurangi potensi kerusakan akibat pemasangan paksa. Kesimpulannya, alat bearing heater yang dibangun dalam penelitian ini terbukti meningkatkan efisiensi perbaikan dan dapat menjadi solusi yang aplikatif dalam industri alat berat.
Downloads
References
Acero, Joachin, Burdio, Jose M., Barragan, Luis A., Navarro, Diego, Alonso, Ramon, Ramon, Jorge, Monterde, Felix, Hernandez, Pablo, Llorente, Santiago, & Garde, Ignacio. (2010). Domestic Induction Appliances. IEEE Industry Applications Magazine, 16(2), 39–47. https://doi.org/10.1109/MIAS.2009.935495
Anwari, Achamad, & Pramudia, Mochamad Agus. (2024). Rancang Bangun Alat Pemanas Bearing Untuk Perawatan Mesin Industri. 411–423.
Bosowa, P., Parawangsa, Naro, & Wibowo, N. R. (2021). Rancang Bangun Pemanas Bearing Dengan Metode Induksi Untuk Pemasangan Bearing. Journal of Electrical Engineering (Joule), 2(2).
Budianto, Wiji Setio, & Kridalaksana, Arfian Harsa. (2017). Prototipe Sistem Kendali Pengaturan Suhu Dan Kelembaban Kandang Ayam Boiler Berbasis Mikrokontroler ATMEGA328. Prosiding Seminar Nasional Ilmu Komputer Dan Teknologi Informasi, 2(2).
Cekic, Alija, Ganic, Senad, & Mujezinovic, Ajdin. (2021). PDM-MPPT Based Solar Powered Induction Heating System. Engineering Science and Technology: An International Journal, 24(2), 394–405. https://doi.org/10.1016/j.jestch.2020.07.005
da Silva, A. D. L., Neves, J. A. C., & Neves, N. (2023). Induction Heating System for Industrial Bearings or Common Appliances. Springer Proceedings in Earth and Environmental Sciences, 23–33. https://doi.org/10.1007/978-3-031-24892-4_3
El-Sharkawy, Mohamed, & Azab, Mohamed. (2022). Microcontroller-Based Automated Temperature Control of Industrial Induction Heaters Using PID Algorithm. Alexandria Engineering Journal, 61(10), 7695–7707. https://doi.org/10.1016/j.aej.2022.01.030
Jankowski, Tomasz A., Pawley, N. H., Gonzales, L. M., Ross, C. A., & Jurney, J. D. (2016). Approximate Analytical Solution for Induction Heating of Solid Cylinders. Applied Mathematical Modelling, 40(4), 2770–2782. https://doi.org/10.1016/j.apm.2015.10.006
Lucia, Oscar, Maussion, Pascal, Dede, Esteban J., & Burdio, Jose M. (2014). Induction Heating Technology and Its Applications: Past Developments, Current Technology, and Future Challenges. IEEE Transactions on Industrial Electronics, 61(5), 2509–2520. https://doi.org/10.1109/TIE.2013.2281162
Mustoffa, Naufal. (2023). Perancangan Dan Pembuatan Sistem Pemanas Induksi. Institut Riset Sains dan Manajemen Teknologi (IRSTMT).
Namadmalan, Alireza, & Moghani, Javad Shokrollahi. (2011). Single-Phase Current Source Parallel Resonant Inverter for Induction Heating Systems with Improved Efficiency. Journal of Power Electronics, 11(3), 245–250. https://doi.org/10.6113/JPE.2011.11.3.245
Petkovska, Lidija, & Cvetkovski, Goga. (2020). Eddy Current and Skin Effect Analysis in Induction Heating Coil Design. COMPEL – The International Journal for Computation and Mathematics in Electrical and Electronic Engineering, 39(5), 1143–1158. https://doi.org/10.1108/COMPEL-11-2019-0437
Pham, Quoc Vuong, Kim, Se Jin, Shin, Ki Young, & Kim, Hak Sun. (2022). Modeling and Design of High-Frequency Induction Heating Coil for Industrial Bearing Applications. Journal of Electromagnetic Engineering and Science, 22(3), 247–256. https://doi.org/10.26866/jees.2022.3.r.89
Saleh, Muhamad. (2017). Rancang Bangun Sistem Keamanan Rumah Menggunakan Relay.
Sarnago, Hector, Lucia, Oscar, Mediano, Arturo, & Burdio, Jose M. (2014). Design and Implementation of a High-Efficiency Multiple-Output Resonant Converter for Induction Heating Applications Featuring Wide Bandgap Devices. IEEE Transactions on Power Electronics, 29(5), 2539–2549. https://doi.org/10.1109/TPEL.2013.2272549
Sharifi, Saber, & Daldaban, Ferhat. (2022). Bearing Current in Variable Speed Drives: Causes, Effects and Mitigation. Electric Power Systems Research, 213, 108727. https://doi.org/10.1016/j.epsr.2022.108727
Skoczylas, Artur, & Lipiec, Piotr. (2021). Laboratory Setup for Teaching Resonant Converters and Induction Heating. Engineering Science and Technology: An International Journal, 24(5), 1110–1120. https://doi.org/10.1016/j.jestch.2021.02.012
Subni, G., Putra, A., Nabila, A., & Pulungan, A. B. (2020). Power Supply Variabel Berbasis Arduino. JTEIN: Jurnal Teknik Elektro Indonesia, 1.
Vishnuram, Pradeep, Ramachandiran, Gowtham, Ramasamy, Saravanan, & Dayalan, Sundarraj. (2021). Induction Heating Systems for Domestic and Industrial Applications: A Comprehensive Review. International Transactions on Electrical Energy Systems, 31(9), e12944. https://doi.org/10.1002/2050-7038.12944
Wang, Borui, & Yan, Mingyin. (2024). Research on the Heating Effect Evaluation of the Electromagnetic Induction Heating System at Low Temperature Based on the Electrochemical-Thermal Coupling Model. Journal of Energy Storage, 86, 111311. https://doi.org/10.1016/j.est.2024.111311
Copyright (c) 2026 Katiko Imamul Muttaqin, Misbachudin
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
