Analysis of Runway Pavement Thickness Using FAA and LCN Methods
Abstract
Runways are crucial components of airport air transportation systems, serving as the primary surfaces for aircraft takeoffs and landings. To withstand the repetitive loading from various aircraft types, runway pavements must be designed with precise thickness in accordance with applicable technical standards. Despite the availability of various design guidelines, a notable research gap exists in the comparative evaluation of these methods for high-traffic runways to balance structural safety with modern economic and environmental sustainability goals. This study addresses this gap by analyzing the pavement thickness of Runway 3 at Soekarno-Hatta International Airport using two widely applied calculation methods: the Federal Aviation Administration (FAA) method and the Load Classification Number (LCN) method. The analysis utilized secondary data obtained directly from PT Angkasa Pura II, encompassing the dominant aircraft type (Boeing 737-800), annual aircraft movement volume, subgrade California Bearing Ratio (CBR) value (6%), and the specifications of the applied pavement materials. Calculations indicate that the FAA method requires a total pavement thickness of 990 mm, whereas the LCN method yields a lower thickness requirement of 889 mm. These findings demonstrate that the LCN method is more efficient than the FAA method within the context of Runway 3. The practical implications of this 101 mm difference in thickness are highly significant; the application of the LCN method directly contributes to reduced construction costs, minimizes material consumption, and supports sustainability objectives by lowering carbon emissions during the production and construction phases. In conclusion, this study strongly recommends the adoption of the LCN method in the development of modern airport infrastructure, as it has proven capable of meeting stringent safety standards while comprehensively optimizing economic efficiency and infrastructure sustainability.
Downloads
References
Afriyani, S. R. N., & Suryan, V. (2022). Analisa Metode FAA dan ICAO-LCN pada Perencanaan Perkerasan Runway di Bandar Udara Silampari Lubuklinggau. Jurnal Talenta Sipil, 5(1), 158.
https://doi.org/10.33087/talentasipil.v5i1.109
Agus Muldyanto, & Purwanto. (2023). Comparison analysis of flexible pavement runway layers between CBR, LCN, and FAA methods. International Journal of Engineering Research Updates, 4(1), 010–019.
https://doi.org/10.53430/ijeru.2023.4.1.0011
Alaloul, W. S., Altaf, M., Musarat, M. A., Javed, M. F., & Mosavi, A. (2021). Systematic Review of Life Cycle Assessment and Life Cycle Cost Analysis for Pavement and a Case Study. Sustainability, 13(8), 4377.
https://doi.org/10.3390/su13084377
Alaraza, H. A. A., & Mahmud, K. (2022). A Parametric Study of Concrete Runway Pavement Layers Depression Under Impact Load. Vestnik Mgsu, 9, 1206–1217. https://doi.org/10.22227/1997-0935.2022.9.1206-1217
Alrasheed, M. (2023). Estimating Optimal Cost, Insulation Layer Thickness, and Structural Layer Thickness of Different Composite Insulation External Walls Using Computational Methods. Buildings, 13(11), 2774.
https://doi.org/10.3390/buildings13112774
Amakye, S. Y. O., Abbey, S. J., Booth, C. A., & Oti, J. (2022a). Performance of Sustainable Road Pavements Founded on Clay Subgrades Treated With Eco-Friendly Cementitious Materials. Sustainability, 14(19), 12588.
https://doi.org/10.3390/su141912588
Amakye, S. Y. O., Abbey, S. J., Booth, C. A., & Oti, J. (2022b). Road Pavement Thickness and Construction Depth Optimization Using Treated and Untreated Artificially-Synthesized Expansive Road Subgrade Materials With Varying Plasticity Index. Materials, 15(8), 2773.
https://doi.org/10.3390/ma15082773
Ambassa, Z., Eko, R. M., Сафонова, М. Н., Fedotov, A. A., & Ammosova, N. E. (2025). Numerical Analysis of Flexible Airfield Pavements Behaviour Submitted by Large Aircraft: Influence of the Position and Configuration of the Landing Gear. Vestnik of North-Eastern Federal University, 21(4), 45–55.
https://doi.org/10.25587/2222-5404-2024-21-4-45-55
Andika, A., Suparma, L. B., & Utomo, S. H. T. (2023). Evaluation of the Dimensions and Thickness of the Adi Soemarmo Surakarta Airport Apron Pavement Using the FAA (Federal Aviation Administration) Method. Eduvest - Journal of Universal Studies, 3(1), 34–49.
https://doi.org/10.36418/eduvest.v3i1.716
Armeni, A., & Loizos, A. (2022). Preliminary evaluation of the ACR-PCR system for reporting the bearing capacity of flexible airfield pavements. Transportation Engineering, 8, 100117.
https://doi.org/10.1016/J.TRENG.2022.100117
Aziza, V. N., Moh’d, F. H., Maghfiroh, F. A., Notodiputro, K. A., & Angraini, Y. (2023). Performance Comparison of Sarima Intervention and Prophet Models for Forecasting the Number of Airline Passenger at Soekarno-Hatta International Airport. Barekeng Jurnal Ilmu Matematika Dan Terapan, 17(4), 2107–2120. https://doi.org/10.30598/barekengvol17iss4pp2107-2120
Babalghaith, A. M., Koting, S., Sulong, N. H. R., Karim, M. R., Mohammed, S. A., & Ibrahim, M. R. (2020). Effect of Palm Oil Clinker (POC) Aggregate on the Mechanical Properties of Stone Mastic Asphalt (SMA) Mixtures. Sustainability, 12(7), 2716. https://doi.org/10.3390/su12072716
Bahari, A., Nonci, N., & Harifuddin, H. (2022). Perlawanan Masyarakat Desa Terhadap Pandemi Covid-19. Jurnal Sosiologi Kontemporer, 2(1), 35–40. https://doi.org/10.56326/jsk.v2i1.1563
Banyhussan, Q. S., Hassan, H. A., & Kadhum, A. J. (2023). Performance of Reinforced Subbase Materials by Geogrid as Abase Layer Under Weak Subgrade. E3s Web of Conferences, 427, 3008.
https://doi.org/10.1051/e3sconf/202342703008
Baskaran, V., Subash, R. C., Sankar, V. R. S., & Blessy, K. (2023). The Influence of CBRvalue on the Cost of Optimal Flexible Pavement Design. Sustainability Agri Food and Environmental Research-Discontinued, 12(1).
https://doi.org/10.7770/safer-v12n1-art2780
Butt, A. A., Harvey, J., Saboori, A., Ostovar, M., Bejarano, M. O., & Garg, N. (2020). Decision Support in Selecting Airfield Pavement Design Alternatives Using Life Cycle Assessment: Case Study of Nashville Airport. Sustainability, 13(1), 299. https://doi.org/10.3390/su13010299
Caecarma, G. A. A., Munawir, A., & Soehardjono, A. (2025). Cost Efficiency of Variations in CBR of Subgrade to Deflection in Rigid Pavement. Iop Conference Series Earth and Environmental Science, 1488(1), 12081.
https://doi.org/10.1088/1755-1315/1488/1/012081
Calverley, M. A. A. (2025). The Design of British Airports Authority Pavements. https://doi.org/10.33593/iccp.v1i1.1213
Donovan, I., Schnitzler, J., Lee, K. J., Wongsittikan, P., Liu, Y., & Mueller, C. W. (2023). PixelFrame: A Reconfigurable, Precast, Post-Tensioned Concrete Structural System for a Circular Building Economy. Journal of Physics Conference Series, 2600(19), 192007. https://doi.org/10.1088/1742-6596/2600/19/192007
Durand, J. T. M., & Prado, C. A. Q. (2023). Surface Evaluation Supported by the PCI Method for the Severity Level of Asphalt Pavement on Airport Runways. Universidad Ciencia Y Tecnología, 27(118), 87–98.
https://doi.org/10.47460/uct.v27i118.690
Elsaid, E. M. O. M., & Mohamed, A. M. (2021). Flexible Pavement Design Suitable for Sudan. Fes Journal of Engineering Sciences, 9(3), 127–134. https://doi.org/10.52981/fjes.v9i3.706
Fatikasari, A. D., Aryaseta, B., & Wardhani, P. C. (2022). Thickness Analysis of Runway Pavement Construction at Zainuddin Abdul Madjid Airport to Accommodate Boeing 777-300er. Matec Web of Conferences, 372, 8003. https://doi.org/10.1051/matecconf/202237208003
Feppon, F., Allaire, G., & Dapogny, C. (2020). A Variational Formulation for Computing Shape Derivatives of Geometric Constraints Along Rays. Esaim Mathematical Modelling and Numerical Analysis, 54(1), 181–228.
https://doi.org/10.1051/m2an/2019056
Fistcar, W. A., Sudarsono, B., Widayat, W., & Herlambang, A. R. (2024a). Comparative Study of Airport Layer Thickness Planning Between US Army Corp Graphical Method and Federal Aviation Administration (FAA) PCN-ACN and PCR-ACR Method. Media Komunikasi Teknik Sipil, 30(1), 27–35.
https://doi.org/10.14710/mkts.v30i1.56835
Fistcar, W. A., Sudarsono, B., Widayat, W., & Herlambang, A. R. (2024b). Comparative Study of Airport Layer Thickness Planning Between US Army Corp Graphical Method and Federal Aviation Administration (FAA) PCN-ACN and PCR-ACR Method. Media Komunikasi Teknik Sipil, 30(1), 27–35.
https://doi.org/10.14710/mkts.v30i1.56835
García, H., Zubizarreta, M., & Garmendia, I. (2021). Methodology for the Elaboration of the Design Table of GFRP Structures Subjected to Fire. Mechanics of Advanced Materials and Structures, 29(27), 6495–6504.
https://doi.org/10.1080/15376494.2021.1980924
Guritno, G., & Fhilia, A. D. (2024). Evaluasi Panjang Runway Terhadap Pesawat Rencana A380 di Bandar Udara Internasional Zainuddin Abdul Majid Lombok. Sainstech: Jurnal Penelitian Dan Pengkajian Sains Dan Teknologi, 34(2), 1–12. https://doi.org/10.37277/stch.v34i2.2004
Han, B., Polaczyk, P., Gong, H., Ma, R., Ma, Y., Wei, F., & Huang, B. (2020). Accelerated Pavement Testing to Evaluate the Reinforcement Effect of Geogrids in Flexible Pavements. Transportation Research Record Journal of the Transportation Research Board, 2674(10), 134–145.
https://doi.org/10.1177/0361198120935120
Hariyami D, Setiawan A, A. S. (2024). Tebal, Evaluasi Pada, Perkerasan Bandara, Runway Aminuddin, Syukuran Luwuk, Amir Failure, Cumulative Damage. 03, 25–37.
https://doi.org/10.55114/siparstika.v3i2.689
Hatoum, A., Khatib, J., Barraj, F., & Elkordi, A. (2022). Survival Analysis for Asphalt Pavement Performance and Assessment of Various Factors Affecting Fatigue Cracking Based on LTPP Data. Sustainability, 14(19), 12408. https://doi.org/10.3390/su141912408
Hermawan, A., & Sari, Y. A. (2025). Design Analysis of Airport Runway Pavement Overlay Using FAARFIELD 2.1 (Case Study: Fatmawati Soekarno Airport, Bengkulu). Journal of Infrastructure and Civil Engineering, 5(1), 27–35.
https://doi.org/10.35583/jice.v5i1.99
Hidayat, A., Suparlan, S., & Cahyono, F. (2024). Design of Image Processing Application for Foreign Object Inspection Using Drone on Aircraft Runways. Langit Biru Jurnal Ilmiah Aviasi, 17(2), 62–71.
https://doi.org/10.54147/langitbiru.v17i2.1053
Hoole, J., Sartor, P., Booker, J. D., Cooper, J. E., Gogouvitis, X. V, & Schmidt, R. K. (2021). Landing Gear Ground Manoeuvre Statistics From Automatic Dependent Surveillance-Broadcast Transponder Data. The Aeronautical Journal, 125(1293), 1942–1976. https://doi.org/10.1017/aer.2021.45
Hudhiyantoro, H., Moetriono, H., & Suryani, A. (2021). Analisis Perpanjangan Runway Bandar Udara Internasional Adi Soemarmo Solo Jawa Tengah. Extrapolasi, 18(1), 10–24.
https://doi.org/10.30996/exp.v18i1.5209
Hussein, J. A. (2025). Study of Airplanes Annual Departure Effects on Design Airfield Thickness Using FAARFIELD Program. Muthanna Journal of Engineering and Technology, 13(2), 13–22.
https://doi.org/10.52113/3/eng/mjet/2025-13-02-/13-22
Indrawan, M. B., & Effendy, M. (2023). Studi Kinerja Runway 3 Dan Pengaruh Adanya Crossing Taxiway Terhadap Kapasitas Runway 2 Di Bandara Internasional Soekarno-Hatta. Seminar Keinsinyuran Program Studi Program Profesi Insinyur, 3(1). https://doi.org/10.22219/skpsppi.v3i1.6607
Irvayana, I. P. D., Astor, Y., Sihombing, A. V. R., & Sundara, A. (2022). Analysis of Runways Surface Conditions Using Pavement Condition Index Method (Case Study: I Gusti Ngurah Rai International Airports). RSF Conference Series Engineering and Technology, 2(2), 1–11.
https://doi.org/10.31098/cset.v2i2.554
Jelušič, P., Gücek, S., Žlender, B., Gürer, C., Varga, R., Bračko, T., Taciroğlu, M. V, Korkmaz, B. E., YARCI, Ş., & Macuh, B. (2023). Potential of Using Waste Materials in Flexible Pavement Structures Identified by Optimization Design Approach. Sustainability, 15(17), 13141.
https://doi.org/10.3390/su151713141
Kahms, S., Hindemith, M., & Wangenheim, M. (2024). Thermomechanical Modeling of Aircraft Tire–Runway Contact for Transient Maneuvers. Tire Science and Technology, 52(4), 258–288.
https://doi.org/10.2346/tire.23.22012
Kaya, O. (2020). Havaalanı Kaplamalarını Asfalt Ve Beton Ile Yeniden Kaplamanın Karşılaştırmalı Dizayn Ve Ekonomik Analizi. Afyon Kocatepe University Journal of Sciences and Engineering, 20(5), 873–882. https://doi.org/10.35414/akufemubid.713979
KC, N., Aryal, R., Joshi, B. R., & Shahi, P. B. (2022). Thickness and Cost Comparison of Cement Treated and Granular Base for Flexible Pavement: A Case Study of Pathlaiya-Nijgadh Section of East-West Highway of Nepal. Journal of Engineering Technology and Planning, 3(1), 10–17.
https://doi.org/10.3126/joetp.v3i1.49579
Khodary, F., Akram, H., & Mashaan, N. S. (2020). Behaviour of Different Pavement Types Under Traffic Loads Using Finite Element Modelling. International Journal of Civil Engineering and Technology (Ijciet), 11(11). https://doi.org/10.34218/ijciet.11.11.2020.004
Khoemarga, K. V., & Tajudin, A. N. (2020). Structural Design of Airport Runway Case Study: Jos Orno Imsula MOA Airport. Iop Conference Series Materials Science and Engineering, 852(1), 12013.
https://doi.org/10.1088/1757-899x/852/1/012013
Kim, D., & Chang, H.-S. (2021). A Study on the Variation in the Risk Probability of Runway Strips Due to the Runway Displaced Threshold. Journal of the Korean Society for Aviation and Aeronautics, 29(4), 45–51.
https://doi.org/10.12985/ksaa.2021.29.4.045
Kinasih, R. K., Hariadi, M., & Isradi, M. (2025). Evaluasi Kesiapan Runway Bandar Udara Fatmawati dalam Rangka Transformasi Menjadi Bandara Internasional. Jurnal Profesi Insinyur Universitas Lampung, 6(1).
https://doi.org/10.23960/jpi.v6n1.158
Kochetkov, V., Filoniuk, D., & Kochetkova, O. P. (2025). Aviation Infrastructure: Concepts and Components. Problems of Systemic Approach in the Economy, 2(99). https://doi.org/10.32782/2520-2200/2025-2-3
Koh, D., Tokbolat, S., & Blaauw, S. (2024). Life Cycle Assessment of Pavement Construction: A Case Study. Iop Conference Series Earth and Environmental Science, 1363(1), 12065. https://doi.org/10.1088/1755-1315/1363/1/012065
Li, Y., & Wang, W. (2024). Tyre Heat of Multi-Wheel Bogie Undercarriage at Touchdown. Ceas Aeronautical Journal, 15(2), 497–509.
https://doi.org/10.1007/s13272-024-00729-7
Linek, M., Bacharz, M., & Piotrowska, P. (2023). Surface Cement Concrete With Reclaimed Asphalt. Materials, 16(7), 2791.
https://doi.org/10.3390/ma16072791
Lo, H. W., Chen, T. H., Fang, T. Y., & Lin, S. W. (2025). Airport sustainability and risk assessment using interval-valued Fermatean Fuzzy MCDM network analysis. Research in Transportation Business & Management, 62, 101454. https://doi.org/10.1016/J.RTBM.2025.101454
Ming, N. C., Aina, A. R., Jaya, R. P., & Ing, N. L. S. (2023). Analysis of Reclaimed Asphalt Pavement With Rejuvenating Materials. Construction, 3(1), 75–86. https://doi.org/10.15282/construction.v3i1.8910
Muldyanto, A., & Purwanto, P. (2023). Comparison Analysis of Flexible Pavement Runway Layers Between CBR, LCN, and FAA Methods. International Journal of Engineering Research Updates, 4(1), 10–19.
https://doi.org/10.53430/ijeru.2023.4.1.0011
Ng, K. K. H., Lee, C. K. M., Zhang, S., & Keung, K. L. (2020). The Impact of Heterogeneous Arrival and Departure Rates of Flights on Runway Configuration Optimization. Transportation Letters, 14(3), 215–226. https://doi.org/10.1080/19427867.2020.1852496
Nugroho, E. A., Widyaningsih, N., & Dwiatmoko, H. (2024). Analysis of Implementation Plans for the ACR -PCR System on Flexible Pavement Runways at Utilization Cooperation Airport. International Journal of Engineering Research and Advanced Technology, 10(04), 1–17.
https://doi.org/10.31695/ijerat.2024.2.1
Okte, E., Boakye, J., & Behrend, M. (2024). A Quantitative Methodology for Measuring the Social Sustainability of Pavement Deterioration. Scientific Reports, 14(1). https://doi.org/10.1038/s41598-024-52655-7
Ongkowijoyo, H. V., & Ruseno, N. (2021). Optimizing The Utilization of Third Runway in Soekarno Hatta International Airport Using Time Space Analysis. Angkasa: Jurnal Ilmiah Bidang Teknologi, 13(1).
https://doi.org/10.28989/angkasa.v13i1.783
Oreto, C., Biancardo, S. A., Abbondati, F., & Veropalumbo, R. (2023). Leveraging Infrastructure BIM for Life-Cycle-Based Sustainable Road Pavement Management. Materials, 16(3), 1047.
https://doi.org/10.3390/ma16031047
Palino, S. D., & Susilo, B. H. (2021). Analisis Tebal Perkerasan Dan Biaya Dengan Software Faarfield Pada Landas Pacu BIJB Kertajati. Jurnal Teknik Sipil, 17(1), 14–29. https://doi.org/10.28932/jts.v17i1.2382
Park, J.-Y., Kim, B.-S., & Lee, D. (2021). Environmental and Cost Impact Assessment of Pavement Materials Using IBEES Method. Sustainability, 13(4), 1836. https://doi.org/10.3390/su13041836
Putro, S. F. H., & Suwardo. (2020). Evaluasi dan Desain Teknis Perkuatan Perkerasan pada Perpanjangan South Parallel Taxiway 1 Bandar Udara Soekarno-Hatta. Jurnal Aplikasi Teknik Sipil, 18(2), 285–294.
http://dx.doi.org/10.12962%2Fj2579-891X.v18i2.6087
Qiao, M., Zhong, K., Li, Y., & Sun, M. (2024). Comparative Study on Mechanical Response in Rigid Pavement Structures of Static and Dynamic Finite Element Models. Aerospace, 11(7), 596.
https://doi.org/10.3390/aerospace11070596
Rafi Sugema, M., & Robi Maulana. (2025). Analisis Perbandingan Perencanaan Tebal Perkerasan Jalan Lentur Menggunakan Metode AASHTO 1993 dan MDP 2024 dalam Konteks Kebijakan Transportasi Berkelanjutan. Jurnal Teknik: Media Pengembangan Ilmu Dan Aplikasi Teknik, 23(2), 112–118.
https://doi.org/10.55893/jt.vol23no2.683
Rahmawati, A., & Rahmawati, F. (2022a). Runway Pavement Strength Evaluation of Yogyakarta International Airports with COMFAA 3.0 Software. International Journal of Integrated Engineering, 14(4), 350–359.
https://doi.org/10.30880/ijie.2022.14.04.027
Rahmawati, A., & Rahmawati, F. K. (2022b). Runway Pavement Strength Evaluation of Yogyakarta International Airports Depends on ICAO (ACN/PCN) Method With COMFAA 3.0 Software. International Journal of Integrated Engineering, 14(4). https://doi.org/10.30880/ijie.2022.14.04.027
Rangelov, M., Dylla, H., Dobling, B., Gudimettla, J. M., Sivaneswaran, N., & Praul, M. (2022). Readily Implementable Strategies for Reducing Embodied Environmental Impacts of Concrete Pavements in the United States. Transportation Research Record Journal of the Transportation Research Board, 2676(9), 436–450. https://doi.org/10.1177/03611981221086934
Reza, M., Alisjahbana, S. W., & Rasyif, T. M. (2024). Stability of Orthotropic Runway Plate Under the Combination in-Plane and Transversal Dynamic Loads on Kerr Foundation Soil Modelling. Iop Conference Series Earth and Environmental Science, 1347(1), 12082. https://doi.org/10.1088/1755-1315/1347/1/012082
Santilli, S. R., & Correia, N. S. (2024). Evaluating Cumulative Damage Factor (CDF) of 20 Brazilian Airfield Pavement Structures Using FAARFIELD and BAKFAA. Transportes, 32(2).
https://doi.org/10.58922/transportes.v32i2.2973
Setiawan, B., Sihombing, S. M., & Darmiyanti, L. (2022). Analisis Peningkatan Tebal Perkerasan Runway Di Lanud Raden Sadjad Ranai Kabupaten Natuna. 8(1), 21–31. https://doi.org/10.61488/sipilkrisna.v8i1.156
Siswosukarto, S., Muslikh, M. P. I. H., & Wijoyo, T. A. (2023). Numerical Simulation of the Effect of Variation in Subgrade CBR Values on Rigid Pavement. Journal of Advanced Civil and Environmental Engineering, 6(2), 65.
https://doi.org/10.30659/jacee.6.2.65-80
Skorupski, J., & Siegień, I. (2024). Petri net model-based approach to runway performance analysis. Journal of Air Transport Management, 120, 102651. https://doi.org/10.1016/J.JAIRTRAMAN.2024.102651
Sofri, L. A., Abdullah, M. M. A. B., Sandu, A. V., Imjai, T., Vizureanu, P., Hasan, M. R. M., Almadani, M., Aziz, I. H., & Rahman, F. A. (2022). Mechanical Performance of Fly Ash Based Geopolymer (FAG) as Road Base Stabilizer. Materials, 15(20), 7242. https://doi.org/10.3390/ma15207242
Sotiropoulos, S., & Lagaros, N. D. (2021). A Two‐stage Structural Optimization‐based Design Procedure of Structural Systems. The Structural Design of Tall and Special Buildings, 31(3).
https://doi.org/10.1002/tal.1909
Sun, J., Chai, G., Oh, E., & Bell, P. (2022). A Review of PCN Determination of Airport Pavements Using FWD/HWD Test. International Journal of Pavement Research and Technology, 16(4), 908–926.
https://doi.org/10.1007/s42947-022-00170-1
Tarun, P. K., & Corley, H. W. (2022). A Dynamic Programming Approach to the Design of Composite Aircraft Wings. American Journal of Operations Research, 12(05), 194–207. https://doi.org/10.4236/ajor.2022.125011
Thamilarasi, V., Hema, R., Juliet, A. N. M., Sheeba, A., Ghule, G., & Raja, A. (2025). AI-Powered Real-Time Runway Safety: UAV-Based Video Analysis With ICSO-Enhanced Deep Learning. International Journal of Computational and Experimental Science and Engineering, 11(1).
https://doi.org/10.22399/ijcesen.1184
Tian, Y., Wu, J., Liu, S., Ling, J., Zheng, Y., Zhao, X., & Liu, L. (2023). Accurate Detection of Concrete Pavement Thickness Based on Ultrasonic Array. Sustainability, 15(10), 8228. https://doi.org/10.3390/su15108228
Uzan, J., & Witczak, M. W. (2025). Composite Subgrade Modulus for Rigid Airfield Pavement Design Based Upon Multilayer Theory.
https://doi.org/10.33593/iccp.v3i1.985
Vasista, T. G., & Jakhanwal, M. P. (2023). Cost Effective Methods in Construction Engineering. Civil Engineering and Urban Planning an International Journal (Civej), 10(2/3), 1–8.
https://doi.org/10.5121/civej.2023.10301
Walubita, L. F., Martínez-Arguelles, G., Polo-Mendoza, R., Ick-Lee, S., & Fuentes, L. (2022). Comparative Environmental Assessment of Rigid, Flexible, and Perpetual Pavements: A Case Study of Texas. Sustainability, 14(16), 9983.
https://doi.org/10.3390/su14169983
Wang, B., Wei, Y., & Zhang, L. (2024). Predicting the California Bearing Ratio via Hybrid Method of Multi-Layer Perceptron. Journal of Intelligent & Fuzzy Systems, 46(1), 2693–2711.
https://doi.org/10.3233/jifs-233794
Wesołowski, M., Blacha, K., Pietruszewski, P., & Iwanowski, P. (2020). Analysis of the Actual Contact Surface of Selected Aircraft Tires With the Airport Pavement as a Function of Pressure and Vertical Load. Coatings, 10(6), 591. https://doi.org/10.3390/coatings10060591
White, G. (2024a). Analysis of the Impact of New Generation Narrow-Body Aircraft on Flexible and Rigid Regional Airport Pavements. Infrastructures, 9(2), 21. https://doi.org/10.3390/infrastructures9020021
White, G. (2024b). Critical Review and Potential Improvement of the New International Airport Pavement Strength Rating System. Applied Sciences. https://www.mdpi.com/2076-3417/14/18/8491
Xiao, Y., Erkens, S., Li, M., Ma, T., & Liu, X. (2020). Sustainable Designed Pavement Materials. Materials, 13(7), 1575.
https://doi.org/10.3390/ma13071575
Yasmiati, F. I., & Haitam, I. (2024). Analisis Pelaksanaan Tugas Ramp Handling Dalam Menjaga on Time Performance (OTP) Pada Maskapai Garuda Indonesia Di Bandara Soekarno Hatta Cengkareng. Jurnal Publikasi Ilmu Manajemen, 3(3), 219–234. https://doi.org/10.55606/jupiman.v3i3.4300
Yoon, D. (2022). Logistics Strategy Research for Efficient Operation of Airports and Ports. Logi – Scientific Journal on Transport and Logistics, 13(1), 96–107. https://doi.org/10.2478/logi-2022-0009
Yulfah, G. A., Sholichin, I., & Utomo, N. (2023a). Runway Pavement Design using the Federal Aviation Administration Method. Cived, 10(3), 980–989. https://doi.org/10.24036/cived.v10i3.27
Yulfah, G. A., Sholichin, I., & Utomo, N. (2023b). Runway Pavement Design Using the Federal Aviation Administration Method. Cived, 10(3), 980–989. https://doi.org/10.24036/cived.v10i3.27
Copyright (c) 2026 Garin Yacub, Askia Esa Aulia, Lilla Anjani Birahmatika, Jhon Hardy Purba
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
